Placing Masters in the Designspace

Assign source designs to axis locations that express the family’s intended interpolation structure.

Define the axes and their design-coordinate ranges first; see Defining Variation Axes. Open Font Info > Masters and select the source whose location you intend to set.

Placing Masters on Axes

After changing the axis list, click Apply or OK so that the Masters page has the updated axes. Then select each master in Font Info > Masters and set its location.

Use the per-axis numeric controls or a location string such as wt=400,wd=100. The identifiers are the FontLab axis codes. Check every axis, including values that remain at a default; a two-axis location is not fully explained by its weight alone.

For a basic weight-and-width design, four useful corner locations might be:

Design Weight wt Width wd
Light Condensed 300 75
Bold Condensed 700 75
Light Normal 300 100
Bold Normal 700 100

These example values describe a connected arrangement: from Light Normal, a step can change width alone to reach Light Condensed, or weight alone to reach Bold Normal. Bold Condensed completes the combinations. A lone diagonal master without the necessary axis connections is not equivalent to that grid.

Plan usable single-axis connections from the main master through the participating masters. Do not assume that any collection of points automatically fills a rectangular designspace. Check intermediate locations along each axis and in combined directions.

Name inference and Detect Axes can save entry work, but inspect the final numeric values. Two differently named masters can still occupy the same location, and changing a location does not redraw its glyphs.

The AAA control on a master entry governs participation in interpolation; its use is covered in Previewing and Diagnosing Interpolation. Keep the intended source masters participating and treat exclusion as a separate choice from hiding their overlays. Before continuing, check distinct locations, intended axis codes, main-master placement, and the connections between designs.