Changing Node Types
Choose how adjacent segments meet at a node, then inspect the resulting tangent and curvature relationships.
Open the glyph with the Contour tool and select the nodes to change. Keep the filled outline visible while comparing the joint before and after the change.
Changing Node Type
Double-click a node to switch between corner and smooth behavior. For an explicit choice, select the node or nodes and use Contour > Nodes > Corner or Smooth. A smooth conversion can realign handles and alter the neighboring curves.
Toggle Smooth changes the smooth/corner property more conservatively, without the same immediate conversion of adjoining segment types. Detect Smooth finds geometrically aligned corner nodes and assigns smooth behavior. Inspect the result rather than assuming that every visually gentle join has been recognized.
The immediate Smooth/Corner operations are eager conversion: they can adjust handles and neighboring segment types. Toggle Smooth is the lazy conversion route: it changes the property without the same segment-type conversion. It does not act on a node between two straight segments. Converting a corner node to smooth and back restores its original handle direction.
Use these distinctions when the drawing already has a useful shape. If the intention is to identify an existing aligned join as smooth, inspect Detect Smooth or the conservative toggle. If the intention is to change the construction, an immediate conversion may be appropriate. After either route, examine both neighboring segments rather than only the node marker. A marker reports a relationship; it is not a guarantee that the complete curve is well drawn.
Contour > Convert > To Corner is a different construction operation. It replaces a selected segment, or an open path's endpoint gap, by extending adjacent segments to their intersection and placing a corner there. It changes the path geometry rather than merely assigning a node property. Compare the result and undo if that extension is not intended.
Remove Special Node Behavior
The Convert Nodes operation can remove Genius or Servant status selectively. Choose the intended node properties and target selection, then inspect the resulting contour behavior. Removing a special status is different from deleting a node or changing the cubic/quadratic representation.